Legacy Blowers

California Turbo manufactures two 9" scroll blowers for local utility companies in California. These blowers are particularly suited for use in existing vaults where the inlet and outlet are provided through deuctwork, versus a through the wall arrangemet used by our Swingout blowers. These blowers are also suitable for negative pressure installations.
VEB09M115 - Round outlet flange More Information on VE-2 Blowers	VAULT VENTILATION Blower ventilation is required for below and above ground transformer vaults and transformer rooms to remove heat dissipated by the transformers Blower generates positive pressure that prevents sewer and other gases entering the vault The blower discharges high velocity turbulent air that is pushed all around the vault or room Tutorial on Vault Ventilation

BSM09M115 - Square outlet flange More information on Basemount Blowers	Discharge may be rotated in 22.5° increments Heavy duty construction Hot dip galvanized Completely assembled and ready for installation No belts to replace or adjust Designed for continuous operation CCW rotation standard (as shown, CW rotation isavailable) Single and three phase motors available 1310 CFM to 2030 CFM Tutorial on Vault Ventilation
Information on Underground Vault Blower Accessories

10721 Business Drive, Fontana, CA 92337 USA
Phone: 909-854-2800 or 800-448-1446
Fax: 909-854-2801
E-mail: websales@californiaturbo.com
Welcome to California Turbo and thank you for visiting our website.

Legacy Blowers

VAULT VENTILATION